board and batten wainscoting – wainscoting, a sort of raised wall covers often manufactured from wooden, covers the decrease a part of an internal wall. Not solely wainscoting provides model on the wall, defending the decrease a part of the wall from dents, dings and dents. In the event you presently have a board and batten wall, you possibly can nonetheless set up wainscoting, however you could take away the mats on the underside of the wall first.
Including board and batten wainscoting, measure from the underside of the wall to the specified peak peak of the wainscoting. Though that is usually between 32 and 34 inches, it could be one thing the peak you need. Do not forget that a wainscoting cap will add a further 2 to three inches to the peak. Determine on this measurement. Snap a chalk line from one nook of the wall to the opposite to characterize the highest line of wainscoting cowl. Reduce the mats alongside the chalk line with a handsaw. The carpets are thick strips overlaying seams the place wall boards meet.
11 Picture Gallery: Including board and batten wainscoting
After that for including board and batten wainscoting. Take away carpets from the wall under the lower line with a flat iron. Drag any remaining nails from the wall boards. Let the bat on the higher a part of the wall. Set up wainscoting cowl first, pushing it under the decrease fringe of the lower sheets. The highest of the wainscoting cap needs to be flush with the chalk line. Begin in a single nook of the wall, and set up the primary wainscoting card slot edge within the nook and the tongue edge going through out. Nail the primary board in place with the pneumatic Pinned, places 4d end nails 1/2 inch from the nook and eight inches aside.
This post topic: Wainscoting